Heavy Duty Slider and Roller Bed Belt Conveyors

Omni MetalCraft Corp. model BCST-600 welded conveyor will provide you a rugged frame construction for those heavier products in your assembly, sorting or other unit handling applications.

SLIDER BED AND ROLLER BED BELT CONVEYOR (BCST)

BCST-600 (Heavy Duty)

• Welded Constuction
• 7 1/2 in. formed 7 ga. channel frame
• Belt Widths 12" through 60"
• Drive packages available up to 5 HP
• Roller Bed: 2 1/2 in. dia. x 11 ga. rollers with 11/16 hex shafts spaced every 6 inches.

STANDARD SPECIFICATIONS:

Belt
Black Trackmate 120 EMB with clipper lace

Belt widths
12 in. to 60 in. in full one inch increments.

Bed
7 ga. slider bed pans welded in 7 1/2 in. deep x 7 ga. painted steel channel frames. Standard 5 FT. and 10 ft. long welded sections, with welded-in end couplers.

Floor Supports
4 in. structural channel legs with 4 in. of adjustment. Available up to 89 in. top of belt. One support at every bed joint and at the ends of conveyor.

Drive Pulley
8 in. dia. with 1 15/16 in. dia. shaft, 12 in. dia. with 1 15/16 in. dia. shaft or 2 3/16 in. dia. shaft, crowned and fully lagged.

Tail Pulley
6 in. dia. with 1 11/16 in.dia. shaft, 8 in. dia. with 1 11/16 in. dia. shaft,crowned.

Snub Roller
3 1/2 in. dia. with grease packed ball bearings (Adjustable)

Return Rollers
1.9 in. dia. or 2 1/2 in. dia. with grease packed bearings.

Take-Up
Provides belt take-up at tail pulley to allow for future belt stretch.

Bearings
Sealed,pre-lubricated,self-aligning ball bearings on drive and tail pulleys.

Conveyor Speed
Constant 60 FPM

Speed Reduction
Sealed worm gear "C" face flanged speed reducer.

Motor
230/460V - 3 phase - 60Hz -totally enclosed,fan cooled.

Electrical Controls
Available as option.

Frame Capacity
Maximum load per linear foot with legs on 10 ft. centers = 620 lbs.

Back to Conveyor