|
All-Welded Lockers
  All-Welded
lockers offer superior resistance to hard use and abuse. All body
parts are welded into a single rigid unit to resist damage for the
life of the product. The backs, tops and bottoms of each group of
lockers are from one piece of steel that spans multiple lockers.
The doors are made from 14 gauge steel. Sides, tops and bottoms
are 16 gauge steel. Backs are 18 gauge. All-Welded lockers come
standard with continuous "piano type" hinges.
Since All-Welded lockers are shipped pre-assembled,
the time and expense of on-site installation is greatly reduced.
This is a great help where labor is either extremely expensive or
hard to find. Groupings will be determined by Penco based upon the
floor plan layout drawings submitted with the order.
All-Welded lockers are available as standard in
ventilated models with diamond-shaped perforations in the doors
and sides for maximum visibility and ventilation or with solid door
and side construction, with or without door louvers. The perforated
models are ideal for heavy duty athletic use where ventilation is
important to aid the drying of athletic gear.
|
 All-Welded
lockers come in a variety of styles. Single tier, double tier and
triple  tier all have stainless recessed handles. Four, five, six,
eight and nine tier box locker doors have apadlock hasp and a friction
catch. All will accept built-in locks and padlocks. An available
option on box lockers is a spring-loaded positive catch.
Double and triple tier lockers have welded horizontal
frame intermediate cross members between the doors for added strength
and security. 24" wide doors are one piece, full width. Standard
fillers are used when required. Sloped top construction is available
as an accessory by ordering sloped hoods, which are field installed.
 The
All-Welded Defiant Single Point Latch Lockers
Option for All-Welded lockers has extra strength and the low maintenance
inherent in a door with no moving parts. It is available with diamond
shaped perforations, louvers or as a solid door on 1, 2, and 3 tier
lockers. All defiant lockers come standard with continuous hinges.
Each door has a patented deep drawn stainless steel
handle with integral door pull and extra heavy duty 3" hinges.
|
  Back to Penco Lockers
|
|
2011 © JorgensonMaterialHandling.com | All Rights Reserved
Home | Contact Us | Become A Dealer
|
