Penco Patroit Lockers

KD Turnout Locker with Center Partition and 24 inch Security Box All models are equipped with a sturdy full width shelf located 12” below the top to provide ample storage for protective head gear. A chrome plated 1 inch dia. coat rod and heavy-duty coat hooks ensure exceptional hanging capacity below. Adding a center divider allows you to split your storage between uniforms or PPE and civilian clothing storage. For more flexibility, combine several half shelves with a divider and locking compartment and there’s plenty of room to lock up your laptop, side arm, and personal items like a billfold, cell phone and keys.

KD Gear Locker with Center Partition, Shelving, Security Box and Drawer Unit The Patriot Line adds a new twist to the standard Penco locker by introducing a series of optional storage drawers that fit inside the locker. This design frees up valuable floor space in front of the locker when the drawer is not in use and features vertical dividers that permit you to create compartments or just use the drawer to stow bulky items like shoes or patrol bags. The drawer system features an integral full-width pull and heavy duty ball-bearing glides. To save room in tight quarters, combine the drawers with an available seat to open up the area in front of the lockers.

Welded Turnout Locker with Foot Locker The open front Turnout locker makes readiness a reality by allowing PPE to hang freely in the open body of the locker while still providing seating and lockable bulk storage in the optional footlocker. As a flight locker, the Patriot Turnout provides ample space for a helmet and other items on the upper shelf. The hanging area underneath can be outfitted with an optional heavy duty parachute rack or additional 7/8 inch wide wall hooks that can accommodate flight harnesses or survival vests.

Welded Gear Locker with Center Partition and Open Lower Compartment A properly equipped double door Patriot Gear locker can be the ideal solution for a variety of specialized storage challenges. The ample storage areas at both top and bottom of the 36 inch wide model shown here still leaves almost 4 feet between the shelves for hanging uniforms and other gear. The double door format means even the widest lockers in the Patriot line have manageable doors that require half as much floor space as a single door to open. The heavy duty turn handle supplied on all Patriot Gear lockers is designed to deliver, too. The handle itself is made from 3/16 inch thick steel strap and accepts a padlock.

Custom Features: Available upon request. Call 1-877-952-0151 or E-mail us.

• Cell Phone/Key Tray:  The 8” x 2” x 2” tray is sized for organizing phones, radios or keys and can be attached to the optional center divider or to the door using the accessory mounting panel
• Hardwood Seat:  Used in place of a foot locker or drawers, the 1-1/4” thick full hardwood bench provides a sturdy seating surface with open storage underneath for stowing equipment
• Foot Locker:  The reinforced lid of the foot locker features a continuous hinge and also serves as a seat. The front panel includes a single point latch with padlock strike plate and mini louvers for security and ventilation
• Document Sleeve:  Formed from 16-gauge steel, the document sleeve is available in either a vertical or horizontal configuration for efficient storage of portfolios, note pads or binders
• Garment Separator:  The 16-gauge steel channel attaches underneath the top shelf and uses diamond perforations to keep hangers from bunching together for improved ventilation
• Drawer Unit:  Mounted within the confines of the locker body, the steel drawer features full extension glides for easy access to files or equipment without taking up valuable space when not in use. The ball-bearing glides are rated at 250 lb. capacity for performance and durability
• Parachute Rack:  Formed from 3/4" diameter, heavy wall steel tube and reinforced by 14-gauge gussets and supports for hanging heavy flight gear or body armor. Ordering this option replaces the standard heavy duty rear-mounted coat hooks
• Boot Tray:  The 12” x 14” boot tray provides air space between soiled or wet footwear and the shelf or locker bottom. A series of round perforations are used promote air flow and the tray is kept from marring the locker finish by rubber pads
• Accessory Mounting Panel:  A 24" high panel formed from 16-gauge steel permits mounting several accessories to the door without drilling or using exposed fasteners
• Additional Locker Accessories:  Standard locker accessories such as vertical fillers, continuous slope hoods, locker room benches and recess trim are available for use on gear lockers
• Security Box:  Available in either 15” or 24” wide configurations, the security box uses a 14-gauge lockable door, 16-gauge side panel and welded door frame to properly secure valuable equipment and personal items. The 24” model includes a full width shelf to double the usable storage area. Any standard box locker padlock or built-in lock can be used to secure the contents
• Coat Rod:  Chrome plated 1" diameter coat rod.
• Hooks:  Heavy duty coat hooks ensure exceptional hanging capacity below
• Center Divider:  Center divider allows you to split your storage between uniforms or PPE and civilian clothing storage for more flexibility
• Half Shelves:  Combine several half shelves with a divider and locking compartment
• Shelves:  Sturdy full width shelf located 12” below the top to provide ample storage for protective head gear. Flanged on four sides formed to 90 degrees, front edge having a second bend

 

---

Back to Penco Lockers