Boltless Shelving

Boltless shelving is designed to maximize storage space and minimize installation set-up time. All components are engineered to attach snugly to one another without the use of loose fasteners. This unique design has rivets which are factory attached to all left-to-right and front-to-back beams. The rivets align with keyhole slots in the vertical posts. Once tapped into place using a standard rubber mallet, the units are tightly assembled providing maximum strength.

Standard units consist of vertical angle posts at the corners, double rivet angle beams at the top and bottom perimeter and single rivet angle beams running left-to-right only at the intermediate levels. Shelves are of standard 5/8” particle board, Deck, steel or wire decking and simply drop into place. Shelf strength can be increased by upgrading to heavy duty beams, adding single rivet beams running front-to-back at the intermediate levels, upgrading to double rivet beams at the full perimeter of the intermediate levels or upgrading all levels to our strongest double rivet channel beams. Optional center supports can be added using supplied hardware to increase decking capacity.

Double Rivet Shelving

provides a durable solution for the economical storage of retail, wholesale, or industrial goods. Hardware-free installation can be done without tools in a minimum of time. Double Rivet is a high capacity, heavier, more secure alternative to Single Rivet. Its capacities extend to 1800 pounds per shelf level. For alternative deck material such as wire grating, steel sheets, plywood, etc

Double rivet shelving provides massive capacities and accessibility from all sides. It’s great for any bulk storage application.

Because of the high shipping costs, it is often more cost effective to purchase the wood decking for your shelving locally. This might seem inconvenient, but it can really save money. Wood prices also vary regionally, so you might find the particle board purchased locally to be less expensive in actual terms than buying it from us, as well as less expensive in terms of freight.

Single Rivet Shelving

Why Single Rivet? Single Rivet shelving is designed to provide maximum vertical clearance between shelves. Provides access from all four sides of the unit because crossbraces are not needed to maintain stability.

Assembly is easy Assembles quickly and easily without hardware or the use of special tools. Capacities up to 350 lbs. per shelf level available. For higher capacities, order Double Rivet. For alternative deck material such as wire grating, steel sheets, plywood is available

Back to shelving

Home | Contact Us | Become A Dealer