Widespan Sheling

Often imitated, never duplicated. Penco Wide Span is the standard of the industry for shelving designed to contain high, wide or bulky loads. It bridges the storage gap between conventional shelving and pallet rack, and is ideal for a wide range of manually or automatically loaded applications. Penco Wide Span is without question the quickest and easiest shelving product to assemble. There is a minimum number parts, and all major parts simply fit or snap into place. No bracing to add; no hardware required. Penco Wide Span is furnished in 028 Gray baked on enamel finish.
NOT RECOMMENDED FOR FORK TRUCK LOADING.

Components

UPRIGHT FRAMES: Penco Wide Span Upright Frames are made from heavy gauge steel, MIG welded into one rigid assembly containing posts, diagonal and horizontal braces and foot plates. There is no assembly required. Many sizes are available. Posts are punched on the face to provide positive independent beam placement on 2" vertical centers. The posts are marked on 12" centers to facilitate placement of shelf levels. A slot on each side of the post accepts a nib on the end of each beam, to lock it in place. Frames have a capacity of 10,000 pounds with a 1.92 safety factor where vertical beam spacing does not exceed 60".

PLYWOOD SHELVES:
Special beams and supports are used when plywood, pressed wood, particle board, oriented strand board or other composition type panels are used in place of steel shelves (these deck materials must be purchased separately). Two beam types are available: Standard Plywood Beams, and Heavy Duty Plywood Beams. Each is manufactured an extra 1/2" long to facilitate placement of full foot lengths of decking. Each uses a different type of front to back support for the decking material. Neither can be used in the same unit or bay with standard rigidity beams, because the lengths are different.

STANDARD PLYWOOD BEAMS:
Designed to support 1/2" thick deck material flush with top of beam flange when used with the appropriate number of Plywood Support Angles (ordered separately) which insert into slots in beam step. Overall height is 3-1/2". Beam step is 1-1/2" deep by 5/8" high. A 48" deep deck will fit between beams without trimming when a 48" deep upright frame is used.

HEAVY DUTY PLYWOOD BEAMS:
These beams can support a greater load than Standard Plywood Beams, and have a flush front facing the aisle. Requires the use of Beam Brace/Heavy Duty Plywood Supports which are ordered separately. A full 48" x 96" deck will fit on a pair of 96-1/2" beams when 50" deep upright frames are used. Heavy Duty Plywood Beams can be used in the same unit or bay with Standard Plywood Beams, however the depth of the decking material must be trimmed for the heavy duty beams (i.e. deck must be trimmed to 2" less depth than the depth of the upright frame.)

STANDARD PLYWOOD SUPPORT ANGLES:
Standard Plywood Support Angles fit into the slots in the beam step of Standard Plywood Beams. Order separately from beams. Order two per pair of 48-1/2" & 60-1/2" beams; three for 72-1/2" & 84-1/2" beams; four for 96-1/2" beams.

BEAM BRACE/HEAVY DUTY PLYWOOD SUPPORT:
This item fits easily into the inside of the beam opening and has two functions: A) When Rigidity Beams are used as load bearing members, the Beam Braces are used to keep the beams from twisting; B) When used with Heavy Duty Plywood Beams they are used as Plywood supports. Use a minimum of two supports per pair of beams. Use more if required by your load condition.

STEEL SHELVES:
Penco Steel Wide Span Shelves are the ultimate in providing a smooth, safe surface for storing a wide variety of items. They are 1-3/4" high and feature double flanges at front and rear edges with a full width reinforcing pan welded to the center of the bottom. Each shelf requires a pair of Side Shelf Supports, which must be ordered separately. For 36", 42" and 48" depths, the appropriate number of 18" and 24" deep shelves are provided, and are installed together on the Side Shelf Supports to achieve the stated depth.

RIGIDITY BEAMS:

Rigidity beams provide lateral stability for the shelving; a minimum of two pairs of beams is required per unit.They areconstructed of 3" high steel channels with return flanges and a beam end connector welded to each end. Beams are supplied in evenfoot lengths from 4' through 8'. Clearance between upright frames is 1/4" more than stated beam size. If the beams are being used as load bearing members, then Beam Braces are required. All Wide Span Beams have a patented Beam Lock that secures the beam end to the upright post to retard accidental beam dislodging. An embossed nib on the beam end engages a slot on the side on the upright post, which holds the beam end tight against the post. Can be disengaged with a mallet. It is normally not necessary to place rigidity beams beneath each steel shelf.

SIDE SHELF SUPPORTS:
Heavy gauge steel angles which support steel shelves. Each support engages the upright frame at four points.One or more tangs stamped into the surface engages the reinforcing pan on the shelf bottom to prevent accidental dislodging of the shelf. One pair is required for each steel shelf.

RIGID WALL BRACKETS:
Used to fasten upright frames to the wall for sturdy single row applications. Includes hardware to fasten to frame.

RIGID ROW SPACERS:
Used to space and join back-to-back shelving units. Adds rigidity to double row applications. Includes hardware.