Where Dock Boards and Plates is used
Receiving, shipping, trailer loading, dock sealing, vehicle restraint and transitions between trailers and buildings.
Dock Boards and Plates
Dock plates are steel or aluminum rectangles with a locking leg, handle or hand hole for moving them. Dock plates are used with hand truck and pallet jack and span the opening between dock and trailer to facilitate safe loading/unloading. Dock boards act as a ramp for heavy-duty unloading applications such as freight, they are similar to plates but with added structural support on top or underneath the board. Dock boards are available in steel or aluminum depending on strength requirements.
Products
Dock Equipment
Dock Boards and Plates
Loading Dock Equipment solutions
Dock Boards and Plates
Dock plates are steel or aluminum rectangles with a locking leg, handle or hand hole for moving them. Dock plates are used with hand truck and pallet jack and span the opening between dock and trailer to facilitate safe loading/unloading. Dock boards act as a ramp for heavy-duty unloading applications such as freight, they are similar to plates but with added structural support on top or underneath the board.
Coordinate the dock around trailer traffic and safety.
- Measure dock height, approach and trailer range.
- Levelers, seals and restraints should work as one system.
- Installation conditions and operational downtime need an early plan.
Completed projectsDock Equipment ProjectsView projects →
Product guidance
Request a QuoteWhat to know about Dock Boards and Plates.
ALUMINUM DOCK PLATE
- Recommended for nonpowered dock loading applications
- Available in two capacity ranges
- Low-cost solution to light dock loading activity applications
- Bolt-on steel legs for securing position between the dock and the trailer
Lip bend is 11f. Standard lip length for conventional trailers is 11", option of 14" for refrigerated applications. Aluminum dock plates are designed to work well with pallet trucks or other non-powered dock loading equipment. Machine beveled deck edges allow for smooth transition. Wide range of dock plate sizes available. Aluminum Dock Plates offer a low-cost solution to bridging the gap between trucks, trailers and your loading dock.
SPRING LOADED ALUMINUM DOCK PLATE
A Spring Loaded Dock Plate (SL Plate) solves a problem in some common situations. Many times a dock services the exact same truck or type of trucks several times per shift. If the loads are loaded or unloaded by handtruck, dollie or other manual methods the SL plate may be the answer.The aluminum dock plate is fitted with a pair of spring loaded attachments that fix it in place to the dock floor. These springs allow the dock plate to be quickly and safely lowered into place for use. When finished the dock plate is lifted, aided by the springs, into it’s vertical storage position ready for the next truck. It is mounted top of dock so there is no major installation process. Most customers have the personnel and tools to do the job.
Diamond deck aluminum plate assures a non skid surface but can be further enhanced with optional 3M strips of adhesive grit material. Each Spring Loaded Dock Plate by JMH is built for the exact location and equipment serviced in the application.
The SL Plate is very site specific and a worksheet must be completed. Completion of this worksheet will allow us to specify the exact plate size, bend specs and spring weight. We will be able to quote you an exact price and delivery time within 24 hours.
Options for Dock Plates
How to keep the system working
Inspect levelers, bumpers, restraints, seals, lights and controls on a documented schedule; isolate damaged equipment until it is evaluated.
More in this family
Compare related options
Review nearby solutions in this product family or ask a specialist which configuration fits your project.
Proof and available options
Move forward with more confidence.
These resources support the decision. Your project plan and quote remain the next step.
Completed projectBoise CascadeSee dock equipment supporting daily loading and distribution operations.
View completed project →
Current Salt Lake City inventoryShop used dock equipmentAvailability changes regularly. Used equipment can support budgets, expansions and replacement needs.
View current inventory →
Common customer questions
Questions about Dock Boards and Plates
These answers provide a starting point. Final equipment, capacity, layout and installation requirements must be confirmed for the specific facility and application.
What information should I gather before requesting a quote?
Start with the building address, available floor area, clear ceiling height, column spacing, door locations and obstructions. Also include product dimensions and weights, desired storage quantity, handling-equipment information and photos or drawings of the space.
How do I choose the right material handling system?
The right system depends on what you store, how frequently it moves, available space, inventory rotation, handling equipment and future growth.
Why use a professional installation crew?
Correct installation affects alignment, anchoring, capacity and safe operation. Experienced crews follow approved drawings, identify field conflicts and coordinate the work around the facility.
Start the conversation
Tell us what you are planning.
Share the application, dimensions, quantities or timing you know. A specialist will follow up to help define the right solution and quote.
Request pricing & project help
Request a Quote
Tell us about your interest in Dock Boards and Plates. Our material handling team will follow up.
Products coming soon
Contact our team and we will help source the right equipment for your application.
Contact a Specialist